How are lingual brackets bonded to the teeth? The transfer jig
Lingual orthodontics · · 2 min read
A two-part bonding guide (transfer jig) designed to place lingual brackets precisely on the inner surface of the tooth.
The video is in Turkish and loads from YouTube when you press play.
One of the most critical parts of lingual orthodontics is being able to bond those small brackets to the inner surface of the teeth accurately. The inner surface of a tooth is hard to see directly, sloped and highly variable from person to person. That is why the brackets are not placed one by one by hand in the mouth. They are transferred to the positions planned on the computer with special carriers called transfer jigs.
What is a transfer jig?
A transfer jig is a custom-made guide that carries the bracket position set in the digital plan into the patient's mouth. The jig is designed to seat on specific surfaces of the tooth in only one position. This way, the bracket is placed at the planned location and angle.
A two-part jig design
The jig I work with consists of two parts:
- Guide part: The part that seats on the tooth and contains a rectangular tunnel. It makes sure the jig sits on the tooth in the correct position.
- Bracket holder: The part the bracket sits in. It joins the guide part with a tight fit.
When these two parts lock together, the bracket is carried to its planned position in the patient's mouth with very small tolerances. After the adhesive (composite) is hardened with a curing light, the jig is removed and the bracket stays in place.
Why does it matter?
Even small deviations in bracket position can change the direction of the force the wire applies to the tooth. Accurate transfer means:
- The digital plan is reflected correctly in the mouth,
- Fewer additional corrections are needed during treatment,
- The bonding appointment is shorter and more predictable.
Designing, producing, applying
Designing these jigs, producing them on a 3D printer and using them in the clinic is one of the parts of lingual orthodontics I enjoy most. To share my experience in this field with colleagues, I also run a lingual planning and jig and wire design service for dentists under the name Ortodocera.
You can find the whole process in the article How are custom lingual appliances made?, and general information about the treatment on the lingual orthodontics (Saklıtel) page.
Frequently asked questions
Does bonding lingual brackets hurt?
No. The brackets are bonded to the surface of the tooth; no injection or anaesthetic is needed. You do need to keep your mouth open for a while during the appointment.
Are the brackets bonded in a single appointment?
Thanks to the transfer jigs, all the brackets in one arch can be bonded in a single appointment. Even so, with the patient's comfort in mind, we decide case by case in what order and how many brackets to bond.
